#Use a raspberry pi to debrick router password

Now go to physical settings and set the check at wireless network, and be sure to remove it from ethernet adapter. In order to do so we need both our interfaces to use the WIFI. To fix this we will have to totally disable the LAN cable and be able to access it only via wifi. if both work then go on to the next step, if one of them does not work DO NOT go to the next step and try to troubleshoot what is wrong.ДЇor some reason, even if the above step works and you can connect on both ip addresses, you wont be able to connect again to both if you unplug the lan cable. The one set up for the cable in the previous step, and the WIFI IP assigned by your router via DHCP. The next block between the lines is optional, but it ensures that you wont have to hard reset your tplink in case you screw it up (happened twice to me!!)Д¬onnect the TP link to your home router via lan cable, and ensure that you can access the TP link via both ip addresses. for me the wifi router hadthe address 192.168.0.1 so i assigned the address 192.168.0.200. Assign an IP address that matches your existing wifi network's ip address range. Save and apply settings and go to interfaces again. edit wwan, go to firewall tab and assign 'lan' firewall settings.

Now save and apply settings and go to interfaces. Be sure to call the interface wwan, else it wont work.

select your existing wifi lan and connect to it. Now type the ip address of the router in your browser, and access luci with the password. this will download a script that is executed automatically when the tplink connects to a wifi network.

#Use a raspberry pi to debrick router password

Telnet to the router and use 'passwd root' to set a password in order to enable sshД¬lose and ssh to the router and type 'wget -P /etc/hotplug.d/iface/ '. Set up openwrt following any guide you find online.Д¬onnect the tplink to the pc via lan cable and set your ip address to anyhing matching the tplinks address (192.168.1.1) Wireless home network WITH INTERNET ACCESS Here is how i have set up my system and it works great: